How to Install a Ghost Immobiliser
A ghost immobiliser protects your vehicle from key cloning or hacking. It prevents the engine of your vehicle from starting until it is started with a PIN code that can be as long as 20 characters.
It is unnoticeable by thieves, who are unlikely to think about this additional layer of security. Certain systems have an app that allows the owner to disable their immobiliser if they forget their PIN code or to utilize the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is an innovative security system that can be integrated into your vehicle's ECU and provides a discrete security line against thieves. It is extremely efficient and user-friendly. This makes it a valuable addition to your vehicle's arsenal of security. However, like any anti-theft device, it is not 100% reliable and requires regular maintenance to ensure optimal operation. Fortunately, this guide can help you get the most value from your Ghost 2 Immobiliser.
CAN (Controller Area Network) is a reliable serial networking system that lets microcontrollers communicate with each other over small distances. Central control units is not required. It is designed to multiply electrical wiring in vehicles, thereby saving on copper. It has many advantages, including low cost and easy use.
The CAN protocol is utilized in the majority of modern vehicles to communicate with the engine management system, transmission controller, steering control module, air conditioning controls, and many more. It also carries sensor information like speed sensors, as well as other inputs, in order to control the vehicle's various features. The CAN bus can be used to monitor the health of these various components and can stop the vehicle from starting when it is in an unsafe condition.
Although the CAN bus can be utilized for a variety of purposes, it's important to understand how it works and how it's secured. It is possible to add new features to vehicles using CAN bus, but it's crucial to safeguard it against hackers and other threats. The best method to achieve this is to install firewalls and monitoring your CAN bus with software.
Ghost2's discreet control unit is hidden away inside the car's wiring harness or dashboard, eliminating the possibility of a thief physically altering it. It is also impossible to reset a pin code or emergency code without having access to the car.
You can turn on Transport Mode if you need to surrender your vehicle to valet parking, service or for any other reason. This feature will disable the Ghost immobiliser's ignition and keyfob functions and will only come back on when the car reaches 31 mph for 15 minutes.
The process of creating a PIN code
The Ghost immobiliser shields your vehicle from thieves. The revolutionary technology utilizes an PIN to disable the engine of your vehicle and prevent it from starting if you don't have the correct code or an authorized fob or mobile. The system's subtle design ensures the system is unnoticeable and provides unrivaled protection against theft. The system is TASSA-verified and could save you substantial amounts on your car insurance.
During the installation when you install the Ghost system goes into a learning mode to record the sequence of buttons pressed to create your unique pin code. Once the pin code has been created and the installer has completed its work, it will guide you through the process of activating the system. Once activated the Ghost system will disable the vehicle's start motor until you enter a valid PIN or switch the vehicle into transport mode. This makes it difficult for thieves or cloners to hack or duplicate the starter system of your vehicle.
It's easy to set up an easy-to-install Ghost immobiliser, but you must follow the specific instructions in the user's guide to ensure that it is operating properly. Multimeters and basic hand tools are a good way to check electrical values. Insulation tape and heat shrink tubing may shield the wire from damage, while cable tie-ups are crucial to keep everything neat and secure. Also, be sure to check the system frequently to spot any problems and potential mistakes.
It is essential to test the system one more time before you turn on the ignition. The Ghost immobiliser will re-arm itself after a period of 3-30 seconds, based on your vehicle's model. The system also has the option of a Service/Valet mode, which allows you to temporarily remove the system for servicing your vehicle or parking valet.
The immobiliser can be hidden under the dashboard or on the steering wheel. Use a small piece duct tape or paint over the wires of the CAN H and CAN L to make them easier to locate during testing. Additionally, the CAN H and L wires must be connected to a source of power that provides constant 12V. It is essential to test the connections again after testing as incorrect identification of these wires may cause the system malfunction.
Activating the system
A ghost immobiliser prevents your vehicle from starting unless you press a series of buttons inside the vehicle generally the steering wheel, door panel, or central console. The sequence can be changed by the user at any time. Once activated, the system will not be removed. This is a fantastic option for anyone looking to protect their vehicle from theft.
The system is designed not to be able to be detected by modern diagnostic tools and code-grabbing technology. It doesn't emit radio frequencies making it even more difficult for thieves identify.
If the device is found it will stop the engine from running. It will also sound an alarm to scare the burglar away. The device can be used to track the location of a vehicle, which will assist in the recovery of the vehicle if it is taken.
Contact Car Specalist Customs for a quote or to discuss your options in Ghost immobiliser. We are qualified to install ghost immobilisers for your vehicle. We will ensure that it is concealed in a place that is difficult to reach. We can also install additional security measures, including the kill switch and wheel lock, to keep your vehicle safe from theft.
Disarming the system
If you have an Ghost immobiliser that is fitted to your vehicle, it's important to know how to disarm it. ghost immobiliser tracker is useful in case you forget your keys or your battery dies. The system uses an individual PIN code that only you know, and the immobiliser won't start your vehicle unless you enter this code. Pressing a combination button on the steering wheel or on the dashboard is the simplest method to enter your code. This is a much easier method than using the key fob, and also stops anyone from copying your remote.
Contrary to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and is compatible with your vehicle's bus network to function. Its most distinctive characteristic is that it disables the engine, without affecting normal functions of the vehicle. This makes it very difficult for thieves to use signal boosters or to clone keys for cars. Furthermore, it doesn't emit radio frequencies, meaning thieves won't be able to detect it.
The Ghost system comes with the option of a Transport Mode which allows you to temporarily disable security for certain situations such as transportation or service. This is a great option when you have to lend your vehicle to someone else without sharing the PIN code or in case you wish to secure your vehicle while driving it. Press the service button five times in 2 seconds to activate Transport Mode. The Ghost system will confirm activation via five indication signals.
Keep the emergency code inside your vehicle in a safe location. If you happen to encounter a situation where you are locked out of your vehicle, call the technician or company who installed the system, and they will give you the code. If you're unable to contact them, you can call an authorized dealer. However, this might involve verification procedures, and you may be charged additional charges.
Apart from the ease of this system, you can also rely on it to protect your vehicle from theft and cut down on insurance costs. Many insurance companies offer reduced rates or financial incentives to install this system to prevent theft.